If you’ve ever researched in to the cause of your Windows problems, it’s likely that you’ll have heard some discussion over the registry clean process. But what is the registry clean process? Without a firm knowledge of the Windows registry itself, this topic is likely to fly over your head as another mindless tech debate.

To simplify matters, we should be aware that the Windows registry is the pivotal backbone on which the rest of the operating system functions on. Without a registry, we’d have no way of storing our various system settings and configurations. The reason why? It’s because the Windows registry is, essentially, the library for storing information on Windows. This information typically involves hardware configurations, the paths of various applications and their very specific variables. A registry clean process is absolutely fundamental to ensuring that the operating system continues to operate to its full potential.

If you imagine a library where the books get put back on the wrong shelves, with some left to gather in the aisles, you’ve pretty much pictured the state of a Windows registry after several months without maintenance. A registry clean process is important and acts in the way that you’d expect. It allows us to chuck out all the bad files that are no longer of use to us, while re-arranging the important files and data to be accessed easily and without problems by the operating system.

In reality, a registry clean process is far more sophisticated than a librarian walking around picking up strewn books. The Windows registry is extremely complicated and the slightest bad edit can have a cataclysmic effect on the performance of the system, and it can even lock you out of Windows altogether!

There are, however, a large number of tools on the market that allow us to download a utility kit to our Windows system and run a proper registry clean up. The tools are usually free and come with the option to upgrade, but what’s important to note is that they are undoubtedly one of the most effective utilities to have for maintaining good system performance. Without a registry cleaning tool, we have no way of filtering out the bad files and fixing up the increasing number of runtime errors and blue screens of death that you’d routinely associate with a bad registry.

A quick registry clean has, perhaps most appealingly, been proven to significantly improve the speed of Windows. It’s only natural that with so many bad files and data corruptions, an old registry can quickly grind a computer to a halt. Have you noticed how Windows is running so much slower than it did when you first loaded it up all those months ago? That’s probably because you’ve neglected the registry clean process and forgotten to keep your all important Windows registry files tidy.

There are many reasons why a system can become unusable. But whether you’re suffering from a virus, spyware or simply an abundance of redundant registry entries, there’s no doubt that performing a simple registry clean can have a remarkable effect on the functionality of your PC. Don’t let the errors gather to leave your computer in decay!

Get a Free Online Diagnostic Scan with RegCure PC Optimizer (Download 2 Mins)

No Comments »

The problem of the Bad Pool Caller - which occurs during the upgrading of the Microsoft operating system from Windows 2000 to Windows XP - causes the installation process to stop by the display of an error message on the blue screen. This blue screen has been spoken of many times and you’re probably aware of it by now. It’s called the blue screen of death for good reason! If you’re seeing it, something serious has happened to Windows.

In the event of the Bad Pool Cooler error, expect to see a message that reads along the lines of this:

“A problem has been detected and Windows has been shut down to prevent damage to your computer”.

The BAD_POOL_CALLER problem which is displayed as “stop: 0×000000c2″ and other similar varieties essentially happens because of certain issues in managing the memory of the computer.

Now if the error message conveying the problem displays the same set of alphanumeric code every time the system reboots itself, the problem can actually be tackled without going for professional technical help. To begin with, the user must verify the RAM and the hardware of the computer and reboot the operating system once more with the help of a setup disk or maybe by using a boot setup having a GUI similar to that of BartPE.

Try booting in to Safe mode using F8 at the relevant screen. This will try to load Windows using the absolute most basic of files. If you still can’t access the Operating System, you’re going to need the setup disk.

If you’ve bothered to make copies of the key Windows files on a floppy disk, they’re about to become extremely useful and you can use these to regain entry to the core Windows system by replacing just these. You will need to set your BIOS to give preference to the floppy disk drive when booting the system.
Once you regain access to Windows, this is to be followed by running a memory test using a RunScanner and subsequently selecting one single account. In case all the accounts open up, the problem should lie in the system registry hive which is to be renamed and not deleted. From the available backup, another hive is to be created and harvesting of any replacement hive must be avoided in any case.

Apart from this relatively lengthy and somewhat complicated method, there are a couple of quite gimmick like tricks which sometimes solve this problem. One of them is to have the operating system installed once again. This will of course reset Windows to its factory set state, saving a large amount of trouble. But it comes at the price of all your saved files that will not be recovered in the reinstallation. Think long and hard before agreeing to reinstall Windows, it should be the last resort.

Another such trick is to switch off the computer for an extended period of time and then switch it back on once more. It sounds like a ridiculous solution but there are many unexplainable scenarios where such an action can have a good effect.

Get a Free Diagnostic Scan with RegCure PC Optimizer (Download Takes 2 Mins)

No Comments »

The bad pool caller problem is much documented and can occur at any time on a system that is suffering from memory problems or a hardware configuration issue. The error can be either fatal or recoverable. You’re likely to see it when loading up your Windows operating system during the boot process.

A standard bad pool caller error will read as below:

BAD_POOL_CALLER. stop: 0×000000c2 (0×000000043, 0xc2528000, 0×00000000, 0×00000000) ”

You will also be greeted with an ominous message stating:

“A problem has been detected and Windows has been shut down to prevent damage to your computer”.

The blame for this, in most cases - will fall on the hardware that you have installed on your system and the integrity of the memory. Check your RAM for problems, if this is within your knowledge. Has the problem started occurring following the installation of a new hardware device? In that case, you may want to disconnect it completely and remove it from the boot start-up list. Bad references in the Windows registry can completely decimate your Operating System, and these are often caused by hardware installations gone wrong.

Speaking on a technical note, it can be said that this particular bad pool caller problem may arise in a situation where the system has already got a Winnov Videum AVI video capture adapter along with the Videum software of the 2.9.2 version installed in the computer.

The problem is most annoyingly realized during the process of installing the operating system. Typically, an option appears for getting updated setup files and recommending the download of those files. However, clicking on either of the options such as ‘Yes, download the updated setup files’ or ‘Details’ results in the appearance of messages informing that the items are not compatible with the OS Windows XP and these problems must be resolved before attempting to run the setup once more.

Thus, if the user decides to go for the remaining option of ‘No, skip this step and continue installing Windows’ the blue screen appears carrying an error message saying that “STOP 0xC2 BAD_POOL_CALLER”.

Anybody who’s dealt with Windows for any meaningful period of time will be aware of the problems that come with the infamous blue screen of death. You can find yourself locked out of Windows completely, depending on the nature of the pool caller error.

You may have also noticed that the bad pool caller error arises shortly after installing a font on certain versions of Microsoft Windows. Well, in this case, it’s the font that’s causing the problem. Windows will respond stubbornly and thrown the blue screen error if it detects a bad font, although you shouldn’t suffer from repeated bad pool caller errors. And if you do, it’s likely another factor at work.

The system registry hive is another checking point for bad pool callers. If your registry hive fails or becomes corrupted, you can expect to see a whole lot more of the blue screen errors. In most cases, an error of this magnitude will result in being locked out of the computer completely.

Get a Free Online Diagnostic Scan with RegCure PC Optimizer (Download 2 Mins)

No Comments »

There has been much debate over the cause of the 0×0eedfade error, and many different scenarios have been reported where the error is seen.

Some users suffer from a module box error when closing Internet Explorer, others have noted instances where the error has disabled the operating system completely and forced a restart. Of course, restarting the computer might regain control temporarily, but when the error strikes again, you’re stuck in a vicious circle.

It’s generally perceived that the error is caused by malicious third party content such as spyware and adware. These redundant files do little or nothing to advance our experience on the computer, but they can cause a great deal of collisions in the way that the system operates.

The first port of call should be to rid your computer of any unsolicited third party content. Spyware is notorious for running in the background and avoiding detection by the naked eye. Yet it can reduce the performance of a system by a considerable margin. It also opens the computer to a new range of virus attacks.

However, spyware removal tools aren’t a foolproof solution. They can potentially damage what’s known as the Winsock stack, and this will lead to more problems and inevitably, more errors.

You can download special Winsock fix utilities which will repair the stack and, rather surprisingly, fix a lot of additional errors in the process. When combining it with a registry cleaner, you can weed out all of the corrupt files and reorganize your system so that any viruses or lingering spyware apps can be taken care of.

If a Winsock patch doesn’t get rid of the 0×0eedfade error, move on to the spyware removal software. There are plenty of free versions on the market and they take care of most third party content. We should stress that it’s extremely important to have sufficient anti-Virus protection on your system, at all times.

Viruses are capable of disabling Windows, particularly if you get one which attacks the boot sector. They also make the blue screen of death a recurring sight, and errors like the 0×0eedfade are known to arise from such infiltrations.

Even if you have a professional standard anti-Virus suite installed, don’t let that lure you in to a false sense of security. Some viruses are now so sophisticated that they can be designed to slip through the net of specific anti-Virus software. The best way to tackle this is to use two separate packages. With the combined technology, you should be able to sniff out all of the bad files.

There is no agreed explanation for when and where the 0×0eedfade error will appear. It is often seen as a third party error. A fault which appears after you’ve installed certain commercial packages (or uninstalled them rather). The most commonly documented problem is with Internet Explorer and an error which forces the system to restart. The toolbar is also disabled, which gives the distinct impression that it’s a virus at fault.

To avoid such problems, run regular scans of your hard drive. Keep a backup of the registry, and clean it once per month. Finally, be sure that you use proper anti-Virus protection when accessing the Internet. This should save you the headache and frustration of a blue screen and repeated 0×0eedfade errors!

Get a Free Online Diagnostic Scan with RegCure PC Optimizer (Download Takes 2 Mins)

No Comments »