When you install a fresh copy of Microsoft Windows, you’ll notice that all of your programs and applications seem to run so smoothly and without errors. It can be quite disheartening when a few months on, your operating system seems to have grinded to a halt with lots of applications failing to respond as they once did.

There are many reasons why your copy of Windows may be degrading in performance. DLL problems and issues with the computer registry are two of the most documented reasons for such a downturn in performance. The Windows registry sits behind the operating system as the backbone of files. It stores all the key application variables and handles configuration settings that we come to rely on.

DLL problems are just as critical as registry problems if allowed to get out of hand. DLL files are written to Windows every time we install a program. They are the libraries that sit behind our applications and allow them to perform all of their tasks. Every time we install a new program, we add a new set of DLL files to Windows. Likewise, when we remove a program or application, we hope that the DLL files associated with that particular program are removed as well.

In some cases, however, after attempting to uninstall a program, the DLL files will remain present on Windows and this can lead to some pretty drastic errors at a later date. Ensuring that you keep Windows free of stray DLLs is one of the tasks that many of the registry cleaning suites have made a priority out of.

DLL problems may be months in the making, without you knowing any better until a new application attempts to access your system memory and can’t because the same memory is corrupted by past DLLs. Keeping the PC clean is important and going back to the original point, one of the top reasons why Windows loads so much faster when you boot it up for the first time.

DLL problems can also be caused by malicious third party software latching on to the system resources. Windows likes to know what its allocating memory to, and if spyware or adware starts to leech from the memory that it previously set aside for other recognise applications, you can expect your attention to be drawn to many runtime errors and illegal operations.

Yes, those runtime errors that can plight system performance if left to develop over time. Most of us have seen them at some point, and they’re usually caused by bad registry entries or interrupted uninstall procedures. These lead on to DLL problems and if an application has DLL problems, it may terminate without warning, or simply function in a wayward manner.

The blue screen of death is another unfortunate symptom of DLL problems. Are you experiencing random blue screens while you try to run ordinary application? It could be because of DLL files being left behind, or becoming corrupted over time. Be sure that you run regular registry scans, and be extra careful when removing programs from Windows.

No Comments »

So why do you need a Windows registry cleaner download? When you first purchase a copy of Microsoft Windows and load it up from start, you’ll probably be aware that things run smoothly without severe loading times and certainly without runtime errors and pop up messages. Why is this, do you think? It’s because the core files in the Windows registry are in top working order. The more we use our system, the more clustered the registry can get, and the greater the performance gains to be had from a Windows registry cleaner download.

A Windows registry cleaner download can work wonders for your system in several key areas. Every time we install software, we add to the Windows registry and this means things can become corrupted with conflicting file types working against each other. A Windows registry cleaner download will go to work by removing all bad registry entries and this will noticeably improve the performance of your system.

Have you ever been plagued by runtime errors and malfunctioning applications? Attacking the root of the problem in the Windows registry can fix this simply and easily without much of the hassle that comes with calling out a technician or sending your computer for a complete overhaul.

There’s no easy way of avoiding errors on Windows. It’s just a given that at some point, you’re going to need to tend to broken drivers or reset some broken paths. A Windows registry cleaner download is of high recommendation, but that’s not to say that you can’t go in and make the necessary changes to the registry yourself. Mending keys, and deleting extra references can have a state changing effect on the operating system. But of course, making the wrong change can have quite the opposite effect.

If you mess with the registry and set it inappropriately you can double your problems in one sweet click of the Apply button. By using a Windows registry cleaner download, we stamp out the risk of making a dangerous change. Do you really want to be locked out of your operating system? Well, exactly. This is just one of many cataclysmic effects that can come with a bad Windows registry.

Download a Windows registry cleaner and let it scan your system. You’ll receive a list of the problems that are fixable and, if you’re feeling brave, you may wish to go in to the core library of files and make the changes to recover your system performance.

Alternatively, you may want to let the utility took take care of things for you. And that’s why it’s great to go for one of the readily available Windows registry cleaner downloads. You’ll only have to click a few OK buttons and sit back safe in the knowledge that the registry is being fixed up safely.

Once you’ve made your changes, reboot the system and Windows should load noticeably faster. Many of the bad registry entries will have had a significant effect on the start-up time as well as the basic performance. Most of the previous system errors will now be fixed. But don’t get too comfortable just yet!

As we’ve already seen, these errors can occur at a moment’s notice and may need to be removed again at a later date. Get a Windows registry cleaner download and be ready to eliminate the problems as and when they arise.

Get a Free Online Diagnostic Scan with RegCure PC Optimizer (Download Takes 2 Mins)

No Comments »

This is a problem which arises when you try to install or remove a Microsoft application. It could be a copy of Microsoft Word, the latest Microsoft Digital Image Pro or even Outlook. For a full list of the affected programs, take a look at the Microsoft website under instructions for Error 1606.

The error is usually the result of a corrupted Windows registry. This isn’t immediately apparent when you receive the error, which will appear as seen below:

“Error 1606: Could Not Access Network Location”

To fix the problem, you have two choices. One is manual, and one is automated. You can download a free registry cleaning utility and run a thorough scan of your system. This will take note of the missing settings and correct them where necessary.

Alternatively, if you have a little more technical know-how, you can access the registry and adjust the settings yourself. Be warned though, tampering with the Windows registry and configuring settings inappropriately can result in even more problems, and in some cases, a corrupted copy of Windows altogether! Yes, editing the registry CAN seriously damage your system if you don’t know what you’re doing.

We would suggest that you take the safe route of downloading a free registry cleaner and letting it fix your problem. But if you’re feeling adventurous, here’s how to get rid of the error manually.

• Go to Start, Run, and then type “regedit” in the dialogue.
• When the Registry Editor opens, locate your way to:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\
  CurrentVersion\Explorer\User Shell Folders
• View the table below and ensure that all of the entries match up to those of your own registry.

If any of the entries don’t match what you see in the table;

• Delete the value.
• Right click on User Shell Folders, go to New and then Expandable String Value.
• Enter the name value in accordance with the matching name value in the table above.
• Now right click on the new entry and go to Modify.
• Type the new value in the Value Data box.
• Click OK

Follow the same procedure to correct the values in:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\
CurentVersion\Explorer\User Shell Folders

This should clear up any future Error 1606 problems. Remember to save the registry and restart your computer for the new settings to take effect. And whenever you’re editing the Windows Registry, as ever, it’s a good idea to make a back-up in case something goes wrong.

Get a Free Online Diagnostic Scan with RegCure PC Optimizer (Download Takes 2 Mins)

No Comments »

If you receive an error stating “Cannot find C:\Windows\System32\System32.exe” when booting your copy of Windows XP, it’s highly likely that you’re suffering from a well documented problem associated with the W32.KWBot.C.Worm virus.

Also known as Worm.P2P.Tanked.14 and Win32/HLLW.Kwbot.C, this particular virus operates through the Kazaa and Limewire sharing environment. It’s a medium threat virus, so while it isn’t totally destructive, it can cause some significant damage to your system.

So, naturally you’re already thinking, how can I get rid of this threat? Well the good news is that it’s quite easy to remove, as long as you’re careful when working and don’t go making any brash mistakes!

The actual “Cannot find C:\Windows\System32\System32.exe” error is thrown AFTER the virus has been removed. Not a very successful removal after all, you’d think. And you’d be right. The major anti-Virus suites are all guilty of an occasional loophole. In the case of the System32.exe error, that loophole is usually an incomplete removal of all registry traces of the W32.KWBot.C.Worm virus.

If you run through a standard virus scan of your computer and delete a few troublesome looking files, it’s possible that the next time you boot Windows; you’ll be presented with this error. To get to the bottom of it, we need to access the Windows registry and make a few slight alterations to remove the last traces of the virus.

Now, as ever, you should note that using the Registry Editor requires a great deal of attention. It’s not the sort of utility that you open up and play around with callously. In fact, a single bad edit can leave you locked out of your Windows XP system!

We would suggest that you download one of the many free registry cleaners if you’re lacking confidence in the area of critical system edits. In fact, we can’t stress it highly enough. A registry cleaner will usually get rid of stray entries and you’ll notice that the errors disappear with them.

But for the sake of knowing what you’re doing to your system, here’s how you can remove the W32.KWBot.C.Worm virus entries manually.

• Go to Start, then Run, and type “regedit”.
• Locate the following keys:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Run\SystemSAS system32.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Run\CMD cmd32.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\RunServices\SystemSAS system32.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\RunServices\CMD cmd32.exe HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\
CurrentVersion\RunOnce\SystemSAS system32.exe HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\
CurrentVersion\RunOnce\CMD cmd32.exe HKEY_Local_Machine\Software\Krypton

• Click on the Edit menu option.
• Delete each key.
• Find the HKEY_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\Shell key.
• Click on the Edit menu option
• Click Modify and enter Explorer.exe as your value.

Finally, you will need to delete any of the remaining corrupted entries from the Kazaa and iMesh libraries. You will only need to do this for the program which you have installed.

Search for any values that point to C:\%Windir%\User32 or C:\%Windir%\UserTemp, and delete them.

You should then save your registry and restart Windows. In most cases, the error will have disappeared. If it remains, you will definitely need to download a comprehensive registry cleaning utility. This will search out any extra complications. As an absolute last resort, a full Windows repair may be necessary. This shouldn’t be considered until the other avenues have been exhausted. The registry edits above will fix the problem nine times out of ten.

Get a Free Online Diagnostic Scan with RegCure PC Optimizer (Download Takes 2 Mins)

No Comments »